Common Wood For Solid Wood Sofas

1. Red pine: The material is light and soft, with moderate strength, good dryness, water and corrosion resistance, and good processing, coating, coloring, and bonding properties.
2. White pine: The material is light and soft, elastic, with a fine and uniform structure, good dryness, water and corrosion resistance, and good processing, coating, coloring and bonding properties. White pine has higher strength than red pine.
3. Kasla: It has a hard texture, stable quality, yellow red color, good luster, interlaced texture, delicate and uniform structure, good corrosion resistance, and small shrinkage.
4. White wax wood: There are many choices for high-end furniture, which is tough and elastic, with obvious wood grain, coarse grain, more corrosion-resistant, good processing performance, high wood quality, sturdy and durable, elastic and beautiful patterns.
5. Birch wood: The material is slightly heavy and hard, the structure is fine, the strength is high, and the processing, coating, and bonding properties are good.
01:18
What is paulownia?
6. Paulownia: The material is very light and soft, the structure is coarse, the cutting water surface is not smooth, the dryness is good, and it does not warp or crack.
7. Limewood: The material is slightly light and soft, the structure is slightly fine, it has a silky luster, is not easy to crack, and has good processing, coating, coloring, and bonding properties. Not resistant to corrosion and slightly warped when dry.
8. Water chestnut: The material is slightly heavy and hard, with beautiful patterns, a rough structure, easy processing, high toughness, good coating and bonding properties, and average dryness.
9. Elm wood: Beautiful patterns, coarse structure, good processability, coating and bonding properties, poor dryness, easy to crack and warp.
02:03
Can't figure out oak and oak? This valuable item must be liked and collected!
10. Oak wood: The material is hard, the structure is coarse, the strength is high, the processing is difficult, the coloring and coating properties are good, the bonding properties are poor, and it is easy to dry and crack.
11. Beech wood: The material is hard, the texture is straight, the structure is fine, and it is wear-resistant, glossy, and not easily deformed when dry. It has good processing, coating, and bonding properties.
12. Maple: Moderate weight, fine structure, easy processing, smooth cutting surface, good coating and bonding properties, with warping phenomenon when dry.
13. Camphor wood: moderate weight, fine structure, fragrant, not easily deformed when dry, good processing, coating, and bonding properties.
14. Willow wood: moderate material, slightly coarse structure, easy processing, good bonding and coating performance. Slightly cracked and warped during drying. Yi Liu
15. Pear wood: The material is hard, with abundant texture, moderate structure, corrosion-resistant, not easy to dry, smooth cutting surface, and good coating and bonding properties.
16. Purple sandalwood (redwood): The material is hard, with abundant texture, coarse structure, strong durability, glossy, and smooth cutting surface.
17. Artificial boards commonly used include plywood, plywood, fiberboard, particleboard, hollow board, etc. Due to the different combination structures of various artificial boards, they can overcome the expansion, contraction, and warping of wood
18. Walnut: Walnut is a medium density, sturdy hardwood.
Because everyone has their own needs, different types of wood have different preferences, for reference only!